Bockhoyle6385

From DigitalMaine Transcription Project
Revision as of 13:34, 22 November 2024 by Bockhoyle6385 (talk | contribs) (Created page with "Researchers and clinicians must acquire or recall essential concepts to understand and apply an appropriate statistical analysis. It is important that journal readers and revi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Researchers and clinicians must acquire or recall essential concepts to understand and apply an appropriate statistical analysis. It is important that journal readers and reviewers can identify when statistical analyzes are being inappropriately used.

Researchers and clinicians must acquire or recall essential concepts to understand and apply an appropriate statistical analysis. It is important that journal readers and reviewers can identify when statistical analyzes are being inappropriately used.

The third molars are forgotten because they are the last in the dental arch, they do not directly influence the smile and they appear only in adolescence, when they do.

1) to provide the clinician with a "checklist" to assess and diagnose changes to be screened in the third molar region in new patients; 2) to reveal the importance of not discharging the patient submitted to any dental treatment without first analyzing the third molars region clinically and on imaging examinations, since many diseases are associated to them.

A list of 10 situations that cover all diagnostic possibilities involving the third molars is presented.

Adopting this protocol is a matter of habit, since the need is fundamental. The next professional assisting your patient may ask "Did he not request examinations for the third molars?".

Adopting this protocol is a matter of habit, since the need is fundamental. The next professional assisting your patient may ask "Did he not request examinations for the third molars?".

Orthodontic treatment in patients with traumatized teeth is a condition that needs good planning in order to achieve satisfactory results.

To discuss approaches to orthodontic treatment of malocclusions associated with trauma followed by avulsion of anterior teeth, reimplanted after a short period of time.

The treatment started with the distalization of upper posterior teeth, with the aid of mini-implants and sliding jigs, followed by the inclusion of anterior teeth in the arch, followed by intrusion of these teeth.

With the treatment, improved mobility of the anterior teeth was achieved, with better insertion into bone tissue. The most important factor for satisfactory treatment and a good prognosis for avulsion is the time the tooth remains outside the socket. Orthodontic treatment in patients with traumatized teeth is not contraindicated; however, clinical and radiographic aspects must be considered.

Among the feasible orthodontic treatment options, the conservative approach can be a very favorable treatment alternative.

Among the feasible orthodontic treatment options, the conservative approach can be a very favorable treatment alternative.

The aim of this study was to evaluate the thickness of the zygomatic-maxillary cortical bone using computed tomography in different skeletal patterns.

A total of 54 patients of both sexes, divided into three groups according to the vertical skeletal pattern, were evaluated for cortical bone thickness of the anterior slope of the zygomatic process of the maxilla, using cone beam computed tomography. Measurements were made at 2mm, 4mm, 6mm, 8mm and 10mm above from first molar mesial root apex. Vertical skeletal pattern was determined by Frankfurt mandibular angle (FMA).

The hyperdivergent pattern had the lowest cortical thickness value, nevertheless, no patient in the hyperdivergent group presented cortical thickness exceeding 2mm, and no patient in the hypodivergent group presented cortical thickness less than 1mm. However, the correlation between cortical thickness and mandibular plane angle was weak and not significant.

Although higher prevalence of thick cortical was observed in the hypodivergent patients, and thin cortical groups in the hyperdivergent group, the vertical skeletal pattern could not be used as determinant of the zygomatic-maxillary cortical thickness.

Although higher prevalence of thick cortical was observed in the hypodivergent patients, and thin cortical groups in the hyperdivergent group, the vertical skeletal pattern could not be used as determinant of the zygomatic-maxillary cortical thickness.

Third generation of LED light curing units might be used in short exposure periods for orthodontic brackets bonding.

This study evaluated the effect of the different radiant exposure (RE) values Manufacturers' instructions (MI), ½ MI, 1/4 MI and Turbo mode. Two third-generation LED curing units were used VALO® and Bluephase 20i® . The degree of conversion (DC) and Vickers hardness (VHN) of an orthodontic composite (OC) (Transbond XT) under metallic (MB) or ceramic brackets (CB) were measured.

OC was applied to the bracket base, which was then placed over an attenuated total reflectance (ATR) table coupled to an infrared light spectroscope, or to a glass surface for the VHN analysis. The specimens were light-cured and DC values were calculated. The VHN was obtained in a microhardness tester. The data were analyzed with 2-way ANOVA followed by Tukey's post-hoc test (pre-set α=0.05). iCRT3 concentration Linear regression analysis evaluated the relationship between RE values and dependent variables.

CB allowed higher DC and VHN values than MB (p< 0.001). No significant difference was noted among groups when CB were used. For MB, MI groups showed the highest DC and VHN values. A significant, but weak relationship was found between delivered RE values and dependent variables.

The decrease in RE values from third generation LED CU did not jeopardize the DC values when CB were used, but can compromise DC and VHN values when MB are used.

The decrease in RE values from third generation LED CU did not jeopardize the DC values when CB were used, but can compromise DC and VHN values when MB are used.Ground-glass opacity is a very frequent and unspecified finding in chest computed tomography. Therefore, it admits a wide range of differential diagnoses in the acute context, from viral pneumonias such as influenza virus, coronavirus disease 2019 and cytomegalovirus and even non-infectious lesions, such as vaping, pulmonary infarction, alveolar hemorrhage and pulmonary edema. For this diagnostic differentiation, ground glass must be correlated with other findings in imaging tests, with laboratory tests and with the patients' clinical condition. In the context of a pandemic, it is extremely important to remember the other pathologies with similar findings to coronavirus disease 2019 in the imaging exams.