Dominguezcamacho7392

From DigitalMaine Transcription Project
Revision as of 14:12, 22 November 2024 by Dominguezcamacho7392 (talk | contribs) (Created page with "mans.Reliable chemical identification of specific polymers in environmental samples represents a major challenge in plastic research, especially with the wide range of commerc...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

mans.Reliable chemical identification of specific polymers in environmental samples represents a major challenge in plastic research, especially with the wide range of commercial polymers available, along with variable additive mixtures. Thermogravimetric analysis-Fourier transform infrared-gas chromatography-mass spectrometry (TGA-FTIR-GC-MS) offers a unique characterization platform that provides both physical and chemical properties of the analyzed polymers. This study presents a library of 11 polymers generated using virgin plastics and post-consumer products. TGA inflection points and mass of remaining residues following pyrolysis, in some cases, proved to be indicative of the polymer type. FTIR analysis of the evolved gas was able to differentiate between all but polypropylene (PP) and polyethylene (PE). Finally, GC-MS was able to differentiate between the unique chemical fingerprints of all but one polymer in the library. This library was then used to characterize real environmental samples of mesoplastics collected from beaches in the U.K. and South Africa. Unambiguous identification of the polymer types was achieved, with PE being the most frequently detected polymer and with South African samples indicating variations that potentially resulted from aging and weathering.Identification of nanoplastics in complex environmental matrices remains a challenge. Despite the increase in nanoplastics studies, there is a lack of studies dedicated to nanoplastics detection, partially explained by their carbon-based structure, their wide variety of composition, and their low environmental concentrations compared to the natural organic matter. Here, pyrolysis coupled to a GCMS instrumental setup provided a relevant analytical response for polypropylene and polystyrene nanoplastic suspensions. Specific pyrolysis markers and their indicative fragment ions were selected and validated. Possible interferences with environmental matrices were explored by spiking nanoplastics in various organic matter suspensions (i.e., algae, soil natural organic matter, and soil humic acid) and analyzing an environmental suspension of nanoplastics. While a rapid polypropylene nanoplastics identification was validated, polystyrene nanoplastics require preliminary treatment. The strategies presented herein open new possibilities for the detection/identification of nanoplastics in environmental matrices such as soil, dust, and biota.Quality control in the production and processing of raw meat is currently one of the biggest concerns for food industry and would benefit from portable and wireless sensors capable of detecting the onset of spoilage. Raw meat is a natural source of biogenic and volatile amines as byproducts of decarboxylation reactions, and the levels of these compounds can be utilized as quality control parameters. We report herein a hybrid chemiresistor sensor based on inorganic nanofibers of SiO2ZnO (an n-type material) and single-walled carbon nanotubes functionalized with 3,5-dinitrophenyls (a p-type material) with dosimetric sensitivity ∼40 times higher for amines than for other volatile organic compounds, which also provides excellent selectivity. The hybrid nanomaterial-based chemiresistor sensory material was used to convert radio-frequency identification tags into chemically actuated resonant devices, which constitute wireless sensors that can be potentially employed in packaging to report on the quality of meat. Specifically, the as-developed wireless tags report on cumulative amine exposure inside the meat package, showing a decrease in radio-frequency signals to the point wherein the sensor ceased to be smartphone-readable. These hybrid material-modified wireless tags offer a path to scalable, affordable, portable, and wireless chemical sensor technology for food quality monitoring without the need to open the packaging.Hydroxide anion transport is essential for alkaline fuel cells, but hydroxide anion has an inherently low conductivity owing to its small diffusion coefficient and high mass. Ordered open channels found in covalent organic frameworks are promising as pathways to enable hydroxide anion transport, but this remains to be explored. Here we report designed synthesis of anionic covalent organic frameworks that promote hydroxide anion transport across the one-dimensional channels. Engineering cationic chains with imidazolium termini onto the pore walls self-assembles a supramolecular interface of single-file hydroxide anion chains in the channels. Epigenetic phosphorylation The frameworks facilitate hydroxide anion transport to achieve an exceptional conductivity of 1.53 × 10-2 S cm-1 at 80 °C, which is 2-6 orders of magnitude higher than those of linear polymers and other porous frameworks. Impedance spectroscopy at different temperatures and studies on deuterated samples reveal that hydroxide anions transport via a proton-exchange hopping mechanism. These results open a way to design framework materials for energy conversions via engineering an anionic interface.Synthetic antioxidants represent a complex group of additive chemicals broadly used in consumer products. While traditional antioxidants such as 2,6-di-tert-butyl-4-methylphenol (BHT) have been well studied, a variety of "novel" antioxidants have emerged with extensive applications but received much less attention. Our study aimed to explore a suite of 34 emerging antioxidants in house dust from four different regions, including Guangzhou (China), Adelaide (Australia), Carbondale (Illinois), and Hanoi (Vietnam). The results revealed broad occurrence of several rarely investigated chemicals in house dust across regions, including triethylene glycol bis(3-tert-butyl-4-hydroxy-5-methylphenyl)propionate (AO245), 2,6-di-tert-butyl-4-(dimethylamino)methylphenol (AO4703), 2,2'-thiene-2,5-diylbis(5-tert-butyl-1,3-benzoxazole) (BBOT), 1,3-diphenylguanidine (DPG), 2,4-bis(1,1-dimethylethyl)phenol (2,4DtBP), and 2,6-bis(1,1-dimethylethyl)phenol (2,6DtBP). In particular, DPG exhibited a median concentration of 5030-11 400 ng/g in house dust from the studied regions except for Hanoi (305 ng/g), generally 1 order of magnitude greater than that of BHT (890-1060 ng/g) and dominating the compositional profiles of antioxidants. Estimated intake of target antioxidants by toddlers via dust ingestion, even under the high exposure scenario, was determined to be 2-4 orders of magnitude lower than the reference doses of selected antioxidants. However, potential risks from long-term exposure to a cocktail of antioxidants under environmentally relevant concentrations merit further investigations due to insufficient knowledge on the sources, fate, and toxicokinetics of these chemicals to date.