Iversenpatterson0639

From DigitalMaine Transcription Project
Jump to: navigation, search

5%, and energy consumption decreased from 0.82 to 0.47 kW h/g NO3--N. The present results showed the promising application of GO-based electrodes with Cu in electrocatalytic nitrate removal.This paper combines solar photovoltaic (PV) to wastewater treatment plants (WWTPs). A new methodology is proposed to design solar PV to reduce energy consumptions of aeration thanks in WWTPs. New analytical equations and parameters, based on the air temperatures, solar irradiations, biological kinetics, dissolved oxygens, mechanical oxygenations, are introduced to obtain the peak power of PV that maximize the auto-consumptions of aeration blowers installed in the oxidation tanks of WWTPs. The method allows a direct preliminary design and a calibrated estimation for energy power. To justify this method, three aspect are mainly discussed (i) the oxidation tanks consume up to 30% of the energy of a WWTP; (ii) the temperature of wastewater is variable during the year, in the smaller WWTPs; (iii) the dissolved oxygen reduces, increasing temperature of wastewater. This methodology will support the sector in making decision over PV investments, helping wastewater utilities to consider sustainable management practices. Therefore, a further contribute to develop the integration of renewable energy sources combined with wastewater sectors is activated.Mine reclamation has long relied on reusing topsoil to mitigate mining impacts but recently constructed soils (i.e., Technosols) have emerged as novel technologies for restoring post mining landscapes. However, their success depends on their ability to sustain soil functions. To assess the efficiency of a limestone mine reclamation, we measured the soil quality (SQ) of a three- (SC3) and seven-year-old (SC7) Technosol under sugarcane, and one 20-year-old (P20) Technosol under pasture, constructed with limestone spoil in southeastern Brazil. Soil chemical, physical, and biological attributes were evaluated and compared with those of an adjacent natural soil (NS; Rhodic Lixisol). We also tested the Soil Management Assessment Framework (SMAF) for assessing the SQ of the studied soils. https://www.selleckchem.com/products/rbn013209.html SMAF was suitable to detect SQ changes over the years of reclamation. After three and seven years under sugarcane cultivation, the Technosols showed similar SQ indexes (= 0.70 and 0.67) to that of the native soil (SQ = 0.69), whereas after 20 years under pasture the SQ (= 0.88) of P20 was superior to that of NS. Overall, the Technosols recovered most of the ecosystem services expected for healthy soils, especially in P20, where carbon stocks were 2.7 times higher than in NS (82.1 vs 30.35 Mg C ha-1). We highlight the importance of using soil quality assessment tools, such as SMAF, in mine reclamation. In summary, Technosols from limestone wastes could restore basic soil functions under tropical environmental conditions within only 20 years.Neonicotinoids are widely used to control insect pests in agriculture. Their presence in the environment can affect the health of non-target insects and aquatic animals. The behaviour of four neonicotinoids, namely imidacloprid, acetamiprid, thiacloprid and thiamethoxam, has been investigated in soils with contrasting characteristics to understand their migration in soil and ecological risk. Among the study neonicotinoids, thiamethoxam and thiacloprid were found to be the least and most sorbed neonicotinoids by all the soils, respectively (up to 186 time greater adsorption of thiacloprid), and their uptake was affected by the content of organic matter in the soil. Leaching studies in columns confirmed that thiamethoxam leached out of the soils readily, pointing out to a relatively high risk of ground water contamination with possible ecological impact when thiamethoxam is used in soils with low organic matter. In soil column studies, the soil with the lowest organic matter presents the greatest residue of neonicotinoids in the sub-surface (≤5 cm). In contrast the soil richer in organic matter presented most of the contamination deeper down in the column; a factor to be considered in the remediation from soil.Phytoremediation enhanced by electrokinetic has been considered as a potential technology for remediating contaminated soils. However, the effects of electric fields on Cd accumulation and photosynthesis in Zea mays (as a cathode) is still unclear. In the present study, Zea mays seedlings were exposed to various doses of Cd2+ (10, 50, 100 μM) to explore the impact of electric fields on Cd accumulation and photosynthesis of Zea mays. Results showed that upon exposure to a concentration of 100 μM Cd, electric fields significantly altered the Cd contents in maize shoots, whereas the concentration of 50 μM Cd increased the Cd contents in maize roots as well as affected the Cd transport from roots to shoots. Uptake index (UI) increased by 1.34%-66.16% with the application of electric fields. The variation of photosynthetic rates attributed to the open or closure of stoma was similar to the change of shoot fresh weight, particularly in maize exposed to high Cd stress. This study proposes a new technology in Cd phytoremediation and provides important information on physiological processes in maize when exposed to Cd stress and electric fields.Australia offers an interesting case study of climate policy effectiveness as Australia has 'tried' a wide range of policies to mixed effect. Given that more than half of Australia's greenhouse gas emissions typically come from stationary energy generation, most climate policy in Australia has focussed on electricity sector reform, particularly the uptake of variable renewable energy and the decrease of thermal power generation. Electricity supply in Australia has undergone substantial change over recent years, substantially due to these policies, and needs to continue changing in the future to meet climate change mitigation targets and ensure stable, cost-effective electricity supply. This paper is therefore written from the perspective of an electricity planner and seeks to learn from the experiences of climate policies tried over recent decades. We start by reviewing the history of Australian energy policy and a description of how the Australian electricity network is structured to operate. We examine the theory and effects of different policies tried, which range from renewable energy targets, carbon pricing schemes, subsidies for renewable energy and research and development initiatives.